- Adt safewatch pro 3000 add user code manual#
- Adt safewatch pro 3000 add user code code#
- Adt safewatch pro 3000 add user code windows#
These links were pretty helpful for disabling the dialer for nowĪ few other bits copied from the manual I found really helpful The keypad program is excellent for testing (and further programming if you’re like me and don’t have an alpha keypad)īefore long, I started getting FC error / Comm Error
Adt safewatch pro 3000 add user code windows#
On my windows laptop, I used the alarmdecoder keypad program.
Powering back up, I connected the battery and reconnected the transformer. The key sequence is *19110ĭone programming, *99 is the command to exit (without locking out programming mode)įollowing the quick start guide, I powered down the panel, disconnected the battery, and connected the alarmdecoder That’s data field *191, I only have one partition configured, and I don’t want it to suppress the beeps. The whole point of this was to enable another touchpad on address 18. If you don’t want to change the installer code, but just read out the installer code, read field is #20.
Adt safewatch pro 3000 add user code code#
Assuming I want to use the code 1234 as my installer code, the sequence is *201234 This will allow me to get back into programming mode without cutting power.
Instantly in programming mode!įirst order of business, setting a new installer code. I pulled the battery connection from my alarm, tripped the GFCI outlet the transformer was plugged into, then powered back up, and pressed both buttons. If you’re still using ADT for monitoring, definitely put your account in test mode before monkeying with anything,Īccording to the Safewatch Pro 3000 manual, you can get into programming without the installer code by pressing both the * and # keys within 50 seconds of startup. I’m going to pick another service for monitoring later, so the ADT communications programming isn’t useful to me. Of course life happens and it was almost another week before I had time to try connecting it. The installation video really helps to clear up any questions about installing it The Getting Started wiki page is also really helpful The quickstart guide that comes with it is helpful enough to get it connected I have to say their shipping is pretty reasonable. So I bought an alarmddecoder AD2USB to interface with the alarm. Looking at the alarmdecoder supported panels FAQ page, the Safewatch Pro 3000 is specifically listed! Score! Looking at the OpenHAB wiki, there’s only a couple options for alarm integration, and alarmdecoder seems to be the thing to use for honeywell/ademco panels The wireless receiver is in the 5881 series, still don’t know for sure the specific model, but I suspect its the 5881enh.
I have a simple touchpad, not an alpha display, probably similar to the 6150, so it’s terrible to program with. Looking at the panel, I have a Safewatch Pro 3000, which the internets tells me is close to a honeywell/ademco vista20p without a couple features like zone doubling. I opted not to pay ADT’s ridiculous monthly fee since reasonable monitoring can be had for $10/month. I was given a user code, but that was it. As you can see from previous posts, I’ve started automating my house.
0 kommentar(er)
